TD851W
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-40
¾
Enable SNMP:
Choose to enable or disable the SNMP support.
¾
System Description:
System description of the device.
¾
System Contact:
Contact information of the device.
¾
System name:
Name of the device.
¾
System Location:
The physical location of the device
¾
Trap IP address:
Destination IP address of SNMP trap.
¾
Community name (read-only):
Name of the read-only community. This read-only community
allows read operation to all objects in the MIB.
¾
Community name (read-write):
Name of the read-write community. This read-write
community allows read and write operation to all objects defines as read-writable in the MIB.
)
Note:
After configuration, you need to click the
Save
button appeared on the left panel so that your
configuration can still take effect after the Router reboots.
4.4.4 DNS
Choose “
Service
→
DNS
”, you can see the DNS screen (shown in Figure 4-41).
Figure 4-41
¾
Attain DNS Automatically:
Select this option, so the device will use the DNS servers which
obtained by the WAN interface via the auto-configuration mechanism.
¾
Set DNS Manually:
Select this option, and then you need to configure the DNS IP address
manually.
62
