Observa Telecom LTE CPE SQI4N4, Quick Start Manual

Page: 37 / 71

The Wi ‐ Fi client connects to the CPE using the found SSID.
3. Set Maximum number of devices .
This parameter indicates the maximum number of Wi ‐ Fi clients that connect to the CPE.
A maximum of 32 clients can connect to the CPE.
4. Set Hide SSID broadcast to Enable .
If the SSID is hidden, the client cannot detect the CPE's Wi ‐ Fi information.
5. Set AP isolation to Enable .
The clients can connect to the CPE but cannot communicate with each other.
6. Set Security .
If Security is set to NONE (not recommended) , Wi ‐ Fi clients directly connect to the CPE.
This security level is low.
If Security is set to WEP , Wi ‐ Fi clients connect to the CPE in web ‐ based encryption
mode.
If Security is set to WPA ‐ PSK , Wi ‐ Fi clients connect to the CPE in WPA ‐ PSK encryption
mode.
If Security is set to WPA2 ‐ PSK , Wi ‐ Fi clients connect to the CPE in WPA2 ‐ PSK encryption
mode. This mode is recommended because it has a high security level.
If Security is set to WPA ‐ PSK & WPA2 ‐ PSK , Wi ‐ Fi clients connect to the CPE in
WPA ‐ PSK&WPA2 ‐ PSK encryption mode.
7. Set the encryption mode.
If… Sets to Description
WEP Authentication mode

Shared authentication : The client
connects to the CPE in shared
authentication mode.

Open authentication : The client connects
to the CPE in open authentication mode.

Both : The client connects to the CPE in
shared or open authentication mode.
Encryption password
length

128bit : Only 13 ASCII characters or 26 hex
characters can be entered in the Key 1 to
Key 4 boxes.

64bit : Only 5 ASCII characters or 10 hex
characters can be entered in the Key 1 to
Key 4 boxes.
Current
password index
This value can be set to 1 , 2 , 3 , or 4 . After a key
index is selected, the corresponding key takes
effect.
WPA ‐ PSK WPA ‐ PSK Only 8 to 63 ASCII characters or 8 to 64 hex
characters can be entered.
WPA encryption This value can be set to TKIP+AES , AES , or
TKIP .
WPA2 ‐ PSK(reco
mmended)
WPA ‐ PSK Only 8 to 63 ASCII characters or 8 to 64 hex
characters can be entered.
WPA encryption This value can be set to TKIP+AES , AES , or