Figure 3‐7
3.3.2
Configuration
the
DHCP
Server
DHCP
enables
individual
clients
to
automatically
obtain
TCP/IP
configuration
when
the
server
powers
on.
You
can
configure
the
CPE
as
a
DHCP
server
or
disable
it.
When
configured
as
a
DHCP
server,
the
CPE
automatically
provides
the
TCP/IP
configuration
for
the
LAN
clients
that
support
DHCP
client
capabilities.
If
DHCP
server
services
are
disabled,
you
must
have
another
DHCP
server
on
your
LAN,
or
each
client
must
be
manually
configured.
To
configure
DHCP
settings,
perform
the
following
steps:
1.
Choose
Network
Setting
>
LAN
Settings
.
2.
Set
the
DHCP
server
to
Enable
.
3.
Set
Start
IP
address.
This
IP
address
must
be
different
from
the
IP
address
set
on
the
LAN
Host
Settings
area,
but
they
must
be
on
the
same
network
segment.
4.
Set
End
IP
address.
This
IP
address
must
be
different
from
the
IP
address
set
on
the
LAN
Host
Settings
area,
but
they
must
be
on
the
same
network
segment.
5.
Set
Lease
time
.
Lease
time
can
be
set
to
1
to
10,080
minutes.
It
is
recommended
to
retain
the
default
value.
6.
Click
Submit
.
As
shown
in
Figure
3
‐
8.
