OBO Bettermann Ion Basic, Operating Instructions Manual

Page: 6 / 16

6 | EN OBO Bettermann
Intended use
1 5 Basic standards and regulations
– IEC 61851-1
– IEC 62196-2
1 6 Applicable documents
– Declaration of conformity
– Mounting instructions, Ion charging stations (for electrical installation
engineers)
2 Intended use
As a sole charging point, the Ion charging station is only intended for
charging electric vehicles in private areas with restricted access, e.g.
private land. The charging station is only suitable for permanent mount-
ing on the wall in interior or protected exterior areas. Charging takes
place according to Mode 3 in accordance with IEC 61851-1 with a type 2
connector for charging single-phase, dual-phase or triple-phase electric-
al vehicles with 11 kW/16 A (factory setting).
Charging electric vehicles with gassing batteries is not permitted.
The charging station is not designed for any use other than that de-
scribed here. If the charging station is used for another purpose, then
this shall render all liability, warranty and damage claims null and void.
3 Safety
3 1 General safety information
Observe the following general safety information:
–
Contact with electrical current can lead to an electric shock. Only
electrical technicians may open the charging station and carry out
electrical work.
– If the device presents defects or damage, then this can cause a fire
or people could be injured by an electric shock. Only use devices in
perfect condition. If you detect defects or damage, then switch off/de-
energise the charging station using the buildings fuse.
– Keep children and animals away from the system.
– People with heart pacemakers or defibrillators may not work on, or be
located in the vicinity of, charging systems and their equipment, e.g.
for maintenance purposes or for troubleshooting.
3 2 Safety stickers
List of safety stickers attached to the device and their meaning:
Danger of electrical voltage!
Ensure de-energisation before working on the device.
Electrical technician!
Only electrical technicians may mount and connect the device.
Protection class!
The device corresponds to Protection Class 1 according to DIN EN 61140
(VDE 0140-1).