OBO Bettermann Ion Basic, Operating Instructions Manual

Page: 8 / 16

8 | EN OBO Bettermann
Product overview
Component/charging station
Ion Basic
charging station
Ion Key
charging station
Ion Basic
Protect
charging station
Ion Key Protect
charging station
19 Potential-free enabling contact (e.g.
for PV systems, ripple controller)
   
20
Modbus RTU interface
(e.g. connection to external controller)
   
4 1 Accessories
Figure Designation Item no
M25/M32 cable gland for
power supply cable
and M12 cable gland for data
cable
Contained in
scope of supply
Weather protection roof for
Basic/Key charging station
Available separate-
ly: 6570105
Weather protection roof for
Basic Protect/Key Protect
charging station
Available separate-
ly:
6570107
M20 pressure compensation
element
Supplied with
weather protection
cover, otherwise
available separate-
ly: 2034680
4 2 Product description
The Ion charging stations are intended for charging electric vehicles in
private areas as a sole charging point. The charging stations possess
the following functions and equipment features:
– Charging according to Mode 3 in accordance with IEC 61851-1
– 5 m charging cable with type 2 charging connector
– Single-, dual- and triple-phase charging
– Suitable for TN and TT networks
– Integrated temperature monitoring
– DC fault current monitoring
– Status information via LED display
– Optionally with key switch for authorisation
– Optionally with full range surge protection
– Including cable bracket
– Prewired, ready for connection
– Potential-free enabling contact, e.g. for PV systems, ripple controller
– Limitation of the charging power to a fixed value, factory setting 11
kW, maximum output 22 kW
– Modbus RTU protocol via RS-485 interface for bidirectional communi-
cation