OBO Bettermann Ion Basic, Operating Instructions Manual

Page: 13 / 16

13 | EN Operating instructions, Ion charging station
Maintaining the charging station
9 Maintaining the charging station
For safe charging station operation, the following maintenance work and
checks must be carried out:
Check/maintenance Interval Execution of
Visual inspection/checking of the correct
function
During use Operator/user
Function check of the
fault current protection device
Every 6 months
Electrical techni-
cian
Insulation check on the charging cable* Every 6 months
Electrical techni-
cian
Inspection according to DGUV regulation 3/
VDE 0105-100
Annually or when the system is changed Electrical techni-
cian
*With the Ion Basic Protect and Ion Key Protect charging station variants, the
surge protection installed in the charging station must be disconnected before
the inspection.
9 1 Checking the function
The perfect function of the charging station can be checked using the
following sequence:
1. Switch on the charging station.
→ Status LED flashes blue.
2. Connect the charging connector to the vehicle.
→ Status LED is continuously blue.
3. Start the charging operation on the vehicle.
→ Status LED is continuously green and there is a clicking noise.
4. Ending of the charging operation by the vehicle.
→ Status LED is continuously blue.
5. Disconnect the charging connector from the vehicle.
→ Status LED flashes blue.
10 Dismantling the charging station
The charging station may only be dismantled by an electrical technician.
11 Disposing of the charging station
Comply with the local waste disposal regulations.
– Product: As electrical waste
– Packaging: As household waste