DOC-00500 Rev. F
7–17
Eden500V/350V/350 User Guide
3. Follow
the
instructions
on
the
wizard
screens,
and
select
the
check
boxes
to
confirm
that:
•
you
have
checked
that
the
tray
is
empty.
•
you
have
closed
the
cover.
Figure 7-19: Head cleaning procedure—wizard screen
4. Click
Next
.
The
printer
prepares
for
you
to
clean
the
heads.
5. When
the
following
screen
appears,
open
the
cover.
Figure 7-20: Head cleaning wizard—steps 5–10
6. Place
the
mirror
on
the
build
tray.
7. Put
on
the
gloves.
8. Soak
the
cleaning
cloth
with
the
cleaning
fluid.
9. Clean
the
orifice
plates,
with
a
back
‐
and
‐
forth
motion
(see
21).
Use
the
mirror
to
make
sure
that
you
have
removed
all
of
the
residue
material.
WARNING:
The print head orifice plates (bottom surface) may be hot.
Do not touch them with your bare hands, and proceed with caution.
