MC 2000
Expandable MIDI Master Controller
90
This video page shows 4 user fields, one display field (
MIDI OUT 1
) and one function field
(
send
). Since the "MIDI OUT 1" field is for display only, and therefore cannot be selected,
it only appears when the option to which it refers is selected, in this case the "
PORT
" field.
So when any other field is selected, the display field disappears.
The relative function keys [F1], [F2], [F4] and [F5] can be pressed, or the cursor keys can
be used, to select the fields required. When a field is selected, it appears between the two
selection symbols, and . Once the desired field has been selected, the desired value
can be entered using the Data Entry devices, such as the Encoder, the numeric keypad
and the [INC] and [DEC] keys.
The "
send
" (send PRG) function makes the following fields available to the user:
•
PORT: Selection of the MIDI OUT port to which the Program Change is to be sent.
The name attributed to the selected port, which can be defined by the user (see
UTILITY - Tables section of this menu) appears in the right-hand part of the display.
The value of the PORT field depends on whether or not the sound board is fitted, as
follows.
- if the board is not installed, the possible values are: 01(OUT1) - 02(OUT2) -
03(OUT3) - 04(OUT4).
- if the board is installed (regardless of whether or not it is recognized) the possible
values are: INT(INTERNAL) - 01(OUT1) - 02(OUT2) - 03(OUT3) - 04(OUT4).
•
CHANNEL
: Selection of the MIDI channel on which the Program Change is to be sent
(from 01 to 16).
•
BANK
: This field can be used to send a bank change message (Bank Select LSB)
together with the Program Change. Enter the appropriate value, bearing in mind that
the OFF condition means that the Bank Select message will NOT be sent.
•
PRG: Number of the Program Change to be sent (0-127).
If the INT port is selected and the board is recognized, when the "PRG" field is selected,
the display field showing the name of the Program, with updating in real time, appears
instead of the display field with the port name (MIDI OUT 1 in the example).
Display field
