6
TECHNICAL FEATURES
GB
Table 1
Model
Code
Speed
Torque
Power
Air
Weight
No-load
max power
Consump.
(rpm)
(Nm)
(W)
(Nl/min.)
(Kg)
ALCYO22 ACCU-TRK
8604272
1200
0,8 - 2
110
340
0,5
ALCYO44 ACCU-TRK
8604274
800
1,7 - 3
110
340
0,5
ALCYO66 ACCU-TRK
8604276
500
1,7 - 3,7
110
340
0,5
ALCYO 22 ATE
8604273
1200
0,8 - 2
110
340
0,5
ALCYO 44 ATE
8604275
800
1,7 - 3
110
340
0,5
ALCYO 66 ATE
8604277
500
1,7 - 3,7
110
340
0,5
Air inlet 1/8 GAS; Ø inside tube min. 6 mm - 1/4" hexagonal connection
(6.35 mm)
Note:
make sure that the performance features required correspond to those described above, otherwise it will be
necessary to choose a different model from the broad range offered by OBER.
CLUTCH
The gear clutch has the function of transmitting to the bit, and therefore to the screw, only part of the torque that may be
produced by the screwdriver so as to ensure optimal screw-tightening conditions. It also makes it possible to maintain a
highly constant level of torque when tightening screws in sequence. The range of clutch settings is determined by the
spring. Four springs are available, each one covering a range of torque values. Each screwdriver is supplied with the
spring specified in table 2. If you should wish to obtain a level of torque outside its range of settings, you may request
other springs.
Table 2
RANGE OF CLUTCH SETTINGS
Spring code
Spring colour
Torque
(Nm)
ALCYO 22
5080213
dark blue
0.8 – 2
ALCYO 44
5080217
plain
1.7 – 3.7
ALCYO 66
5080217
plain
1.7 – 3.7
Equipment sprin
5080198
light blue
0.4 – 0.9
