S
S
S
STN
TN
TN
TN21 Series
21 Series
21 Series
21 Series
OBARA
OBARA
OBARA
OBARA KOREA
KOREA
KOREA
KOREA
PAGE
101-
11.13.2 STN21 PCB settings and LED Information
When DeviceNet is connected, check the PCB settings and LED information given below.
(1) Module address setting <Jumper setting>
The module addresses is factory set as shown below. (Not required to be changed.)
BA1
BA2
Mode
Setting
Open
Open
Module address 0
Factory setting
Open
Short
Module address 1
Short
Open
Module address 2
Short
Short
Module address 3
Not used.
(2) MAC ID and baud rate settings
Use the DIP SW1 of PC-1088 to set the MAC ID and baud rate.
MAC ID setting : Binary setting (range of 0 to 63)
Baud rate
: 125Kbps •••••• SW7-OFF / SW8-OFF
: 250Kbps •••••• SW7-ON / SW8-OFF
: 500Kbps •••••• SW7-OFF / SW8-ON
Standard setting:
DIPSW1
1
2
3
4
5
6
7
8
9
0
Contents
MAC ID setting (binary)
Baud
rate
Fixed
to
OFF
Standard setting
Factory setting 1
0
0
0
0
0
0
1
0
0
(MACID=1),(500Kbps)
0∙∙∙∙∙∙∙∙OFF / 1∙∙∙∙∙∙∙∙∙ON
