P1PVKY / P1PVCDKY
Installation & Service Instructions
030099-347
pg 7 of 14
© Copyright 2007 OASIS Corporation
Filter Installation:
The P1PVKY and P1PVCDKY coolers contain a large filter compartment that can be directly accessed
from the front of the unit.
Accessing Filter Compartment:
•
Lift out and remove the drip tray
•
Depress the clip visible through the slot in the alcove and swivel the door forward
•
Remove the door from the cooler
•
The inlet pipe is now visible on the left hand side of the filter compartment
Installing the filter system:
•
It is recommended that you use a filter system with
¼
” push-fit connections for both inlet and
outlet
•
Refer to the instructions provided with the filter system prior to commencing installation
•
Attach the filter system to the metal column support – you can drill holes as required for
mounting screws
•
Cut the inlet pipe and connect the lower portion to the inlet side of the filter system and the
upper portion to the outlet side of the filter system
