V SERIES V310 | V390 | V480 VARIABLE 3 SPEED POOL & SPA PUMP
INSTALLATION AND OPERATION MANUAL
[email protected]
oasisaquatics.com.au
11
WATER QUALITY
Maintaining balanced water chemistry is important to the life of your pool pump.
This pump is designed to be used with Pool & Spa water, balanced in accordance with Langlier
Saturation Index, with a pH level of between 7.2 and 7.8 and is regularly treated with a chlorine
sanitizing agent with the level not exceeding recommended chlorine levels.
Please consult your local pool shop regularly to have your water tested.
EMPTYING THE HAIR AND LINT POT
The hair and lint pot strainer basket should be inspected frequently through the transparent lid and
emptied when a build up of rubbish is evident.
Follow the directions below.
1.
Switch off pump.
2.
Unscrew the hair and lint pot strainer basket lid anti-clockwise and remove.
3.
Remove the hair and lint pot strainer basket by lifting upwards from its housing.
4.
Empty the trapped refuse from the basket. Hose out with water if necessary.
5.
Check the hair and lint pot strainer basket for cracks, replace the strainer basket in the
pump if OK.
6.
Replace the lid and ensure that it seals on the large rubber o-ring. Firm hand tightness only
is required.
The o-ring & thread can be lubricated with silicone grease.
HOW TO CONNECT TO SUCTION CLEANERS
•
It is important that the PUMP is fully primed when connected to a suction cleaner.
•
Switch pu
mp to “high” setting for 2
minutes if pump is currently switched on, or allow for
initial 5 minute prime.
•
Connect cleaner hose to skimmer plate only after air has been purged from top of hair and
lint pot
•
Sel
ect speed (usually “med”) at which the cleaner w
ill travel to all areas of the pool
•
Disconnect cleaner and remove from pool once it is cleaned. Change setting back (usually
“eco”) to
your daily filtration requirements.
