V SERIES V310 | V390 | V480 VARIABLE 3 SPEED POOL & SPA PUMP
INSTALLATION AND OPERATION MANUAL
[email protected]
oasisaquatics.com.au
10
V390 and V480 VARIABLE 3 SPEED OPERATION
The V SERIES V390 has 3 speed settings
1.
Eco (Energy Saving)
•
This should be used for everyday water filtration
•
The pump should be operated for approximately 8 hours per day depending on the
surrounding climate, bather loads, pool volume and length of pipework.
•
In some cases when your pool has areas where water is not turning over, increase the
speed setting
•
This setting is may be used with a suction cleaner, however, speed may need to be
increased.
2.
Med
•
This should be used for gentle spa jet action and for suction cleaners when connected to
a skimmer box
3.
High
•
This should be used for backwashing, manual vacuuming of the pool, spa jets, infloor
cleaning and/or water features.
PLEASE NOTE
•
The V SERIES V390 w
ill always run at “high” speed for 5 minutes upon start up or a filter
cycle. This assists with priming of the pump and pipe work.
•
After the initial 5 minutes the V390 PRO will revert back to the previous selected speed it
was set at before it was turned off.
•
Priming function can be disable, however, this is not recommended
OASIS’S REC
OMMENDATION
•
During day-to-day operation we recommend to run the PUMP
on “eco” for 8 hours. This
will achieve the lowest noise and lowest operating costs.
•
In some cases (larger pools, warmer climates and increase bather loads you may have to
increase the speed setting or operating duration. This will still provide you with significant
savings.
LIMITS
Water temperature Max 45oC
Ambient Temperature Max 55oC
DBa @ 1 meter 62
