Step 1: Rear Leg and Seat Base to Rails
Tools required: 17mm wrench
4
1.
Remove the rear extrusion mounts from the seat
base bolts.
5.
Carefully roll the assembly over and rest on floor.
Attach the rear leg to the seat base bolts.
7.
Turn assembly over and rest on floor.
4.
Insert the seat base bolts
through the top extrusion mount.
IMPORTANT
3.
Check that the locking latch opens on the top
rail edge. If it opens to the bottom, simply roll the rail
assembly over to orientate correctly.
2.
Attach the extrusion mounts to the top and bottom
of the rear of the rail assembly, with the latch at the
front.
6.
Add washers and nuts and firmly tighten with
17mm wrench but do not ovetighten.
Rear
Top
Front
Bottom