background image

22

The standard warranty term for the DX is 3 years on the frame and 2 years on parts. 
This warranty is under the following terms and conditions:

I. Warranty 

Frame
Oartec will replace or repair, at its option, the DX frame assembly or components that fail due to a defect in materi-
al or workmanship for a period of 3 years from the date of initial shipment.
DX frame assemblies or components are defined as the following:
Rails, Front Leg Assembly, Rear Leg Assembly, Seat Assembly, Rolling Frame Front Assembly
Parts
Oartec will replace or repair, at its option, the DX parts (including workout monitor) that fail due to a defect in 
material or workmanship for a period of 1 year from the date of initial shipment.
Replacement Frame Components or Parts
The replacement DX frame assembly and/or parts will be warranted for the remainder of the original warranty 
period.

II. Who is Protected 

This warranty is given to the original purchaser and fully transferable to subsequent owners if transferred within 
the term of the warranty. 

III. What is Not Covered 

This warranty does not cover the following: 
Any DX that has been modified or altered.
Damage, deterioration or malfunction resulting from: 
- failure to follow the DX maintenance requirements as listed in the DX User Manual
- accident, abuse, misuse or neglect
Deterioration due to normal wear and tear
Damage to the finish of your DX model
Shipping costs and if applicable, customs clearance fees
Labour for installation of any parts shipped to you under warranty

IV. General 

To the maximum extent permitted by law:
Oartec shall not, in any event, be liable for any incidental, indirect, special or consequential damages.
These warranties are in lieu of any other express or implied, including but not limited to, any warranty relating to 
merchantability or fitness for a particular purpose. 
The duration of implied warranties is limited to the length of warranty specified in paragraph I above. 
This warranty gives you specific legal rights. You may also have other rights granted under local laws of your state 
or country. These rights may vary in different countries. 

V. Warranty Claims 
To make a warranty claim, first please contact Oartec to inform us as to the nature of the problem. 
Within USA and Canada please email [email protected] or tel1 360 322 4977. 
For other countries please contact the Oartec distributor listed at www.oartec.com/contact
You will need to provide the serial number for your DX.
Send the defective assembly or part to Oartec Inc at 2657 Delta Ring Road, Ferndale, WA USA, 98248.
Return of the DX frame assemblies/parts to Oartec will be the responsibility of the claimant and must be 
packaged to protect it from damage. 
Oartec will not be responsible for any damage which may occur during shipment. 

6. Warranty

Summary of Contents for DX

























Reviews: