13
Adjusting the Resistance
Move the intake dial up
to make resistance easier
Move the intake dial down
to make resistance harder
Ready to Row
The DX uses an adjustable air resistance system to provide the resistance when rowing.
The resistance is adjusted by moving the air intake dial on the side of the flywheel housing.
The resistance settings are numbered 1 - 10.
The lower the number the less air that can enter the housing, and the lighter the resistance.
You can also set the resistance to a numerical Drag Factor by going to:
MENU - INFORMATION - DRAG FACTOR in the OTM-2.
Thankyou for taking the time to read and complete the
Assembly and Getting Started procedures for the DX.
If you experience any issues with your DX or have any further questions please contact your nearest Oartec office
listed at www.oartec.com/contact
You are now ready to row the DX. We wish you many hours of rowing enjoyment ahead.
WARNING
Rowing is a strenuous physical exercise. Please consult your physician to be sure that it is not
dangerous for you to undertake a strenuous exercise program.
Use of this machine with a worn, damaged or weakened components may result in injury to the user.
When in doubt about the condition of any part, Oartec strongly advises that it be replaced immediately.
Follow the maintenance procedures to ensure optimal performance and prolonged lifetime of your DX.