vi
WARNINGS & IMPORTANT SAFETY INSTRUCTIONS
GROUNDING INSTRUCTIONS
W
ARNINGS & SAFETY
INSTRUCTIONS
GROUNDING INSTRUCTIONS
8. Plug the new foot control into the control box bracket at the
same connection where the inoperable unit had been.
9. Carefully lift the control box, mounting bracket and excess cords
back up into the cabinet floor, being careful to keep all the excess
out of the way of the control box opening. Be sure all cords are
away from the screw area of the knob connections. Line up the
screw holes, hold the control box bracket base plate in position
and begin to fasten the knobs onto the 4 screws. Hand tighten
them until the bracket is secure.
10. Connect the power cord and test the new foot control.
Should you need assistance at any time, please call a Customer Service
Representative at 800-558-8850.
21
TROUBLESHOOTING
• Foot Control Replacement Instructions
TROUBLESHOOTING
TROUBLESHOOTING
• Foot Control
(cont)
GROUNDING
INSTRUCTIONS
WARNINGS & IMPORTANT SAFETY INSTRUCTIONS
GROUNDING INSTRUCTIONS:
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electrical current to
reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 120-volt circuit (see below, USA
plug example)and has a grounding plug that looks like the plug
illustrated in Figure A . Make sure that the product is connected to
an outlet having the same configuration as the plug.
No adapter should be used with this product.
G
•
To remove the accessory from the cabinet:
Turn the accessory controls
to the ‘off’ position and then disconnect the unit from the interior
power source by removing the plug from the outlet.
When moving the table:
Turn the accessory controls to the ‘off’
position, disconnect the table from the exterior power source by
removing the table plug from the outlet.
Correct Implementation
Incorrect Implementation
READ AND
SAVE THESE
INSTRUCTIONS
READ AND
SAVE THESE
INSTRUCTIONS
IMPOR TANT SAFETY INSTRUCTIONS
(CONT.)
WARNING
DANGER-
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check with a qual-
ified electrician or service man if you are in doubt as to whether the
product is properly grounded. Do not modify the plug provided with
the product - if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
