Chapter 3
Getting started with SLN-VIZN3D-IOT
3.1 Box contents
The SLN-VIZN3D-IOT kit is delivered fully assembled in a box with a printed quick start card and a USB-C cable.
Figure 3. SLN-VIZN3D-IOT box contents
Check your kit for damage or marks, and if you find any, contact your NXP representative.
3.2 Running the preconfigured smart-lock application
Before using your kit, remove the protection films on the 3D camera and the RGB camera (see
), which protect the lens
during transport. Otherwise, the depth and image capture will be wrong.
Figure 4. Removing camera protection films
To get started, take the USB-C cable provided in the kit and plug the USB-A end into your computer’s USB port and the USB-C
end into the kit’s USB port.
NXP Semiconductors
SLN-VIZN3D-IOT Kit User Guide, Rev. 0, 01 November 2021
User Guide
8 / 47
