manualshive.com logo in svg

NXP Semiconductors KITPF5200SKTEVM, User Manual, Page: 5 / 51

Share
Download
NXP Semiconductors KITPF5200SKTEVM User Manual Download Page 5

NXP Semiconductors

UM11636

KITPF5200SKTEVM evaluation board

3.3 Windows PC workstation

This evaluation board requires a Windows PC workstation.

•

USB-enabled computer with Windows 7 or Windows 10

3.4 Software

The following software must be installed on the PC workstation prior to using the

KITPF5200SKTEVM evaluation board.

•

PF5200 NXP GUI installation package

4 Getting to know the hardware

4.1 Kit overview

The KITPF5200SKTEVM kit provides an integrated platform for evaluating designs

based on NXP’s PF5200 dual-channel PMIC. All PF5200 features can be accessed and

monitored in a test environment. Limitation related to the PF5200 socket restrict current

to 1.0 A.
The kit hardware consists of the KITPF5200SKTEVM evaluation board, a FRDM-KL25Z

microcontroller board, and the USB cable required to connect the FRDM-KL25Z to the

PC.
The KITPF5200SKTEVM evaluation board features a socket that allows users to flash an

individual PF5200 using the device’s One-Time-Programming (OTP) feature. Connectors,

jumpers, and switches on the board can be used to configure an evaluation environment

that meets specific design requirements. The board also contains LEDs and test points

that provide a means of monitoring performance in real time.
The FRDM-KL25Z is mounted to Arduino connectors on the bottom of the board.

The role of the FRDM-KL25Z is to manage SPI communication between the

KITPF5200SKTEVM board and the GUI installed on the PC. The FRDM-KL25Z draws

power from the USB cable connected to the PC.

4.2 KITPF5200SKTEVM features

•

Banana 4 mm for power supply input

•

Banana 4 mm for switcher 1 and switcher 2

•

TBBEN and PWRON

•

PGOOD, RESETBMCU and XFAIL pins

•

USB to I

2

C protocol for easy connection to software GUI

•

LEDs, green and red, that indicate signal or regulator status

•

LED blue to indicate that VDDOTP pin is set to 8.0 V (OTP burning voltage)

•

HWQFN32 socket to plug and play with PF5200

4.3 KITPF5200SKTEVM featured components

Figure 1

 shows the location of key KITPF5200SKTEVM components.

UM11636

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2021. All rights reserved.

User manual

Rev. 2 — 13 December 2021

5 / 51

Summary of Contents for KITPF5200SKTEVM




















































Reviews:

No comments