NXP Semiconductors
UM11636
KITPF5200SKTEVM evaluation board
In ASIL-B, an exhaustive list of bits is available only in the I
2
C functional registers.
5.2.3.4.7 Interrupts
The Interrupts tag displays interrupts by category and allows you to clear or mask
selected interrupts.
5.2.3.4.8 Status
The Status tab displays the status of selected functions and allows you to modify their
associated values. The tab provides status on the following:
• Fail-safe Transition Event:
allows you to read or clear Fail-safe hard-fault flags
• OTP Mirror Check:
allows you to read and modify mirror register test flags
• WD:
allows you to read and modify the Watchdog expiration counter
• Fault:
allows you to read and modify the fault counter bit field and to enable/disable the
max fault counter
UM11636
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 2 — 13 December 2021
40 / 51