NXP Semiconductors
UM11636
KITPF5200SKTEVM evaluation board
5.2.3.4.5 PMIC config
The PMIC config tab allows you to manage values related to various functions such as
Watchdog, Thermal Monitoring, etc. The PMIC config tab contains the following windows:
• AMUX:
sets values for AMUX_SEL and AMUX_EN
• Selected page:
reads the Page register
• Low-power mode:
selects the Low-Power mode
• GPO (on PGOOD pin):
sets PGOOD low or high
• PWRON:
set PWRON values
• Thermal monitor:
enables/disables the Thermal Monitor and selects whether the
thermal monitor is always-on or whether it is turned on once every millisecond.
• VIN Over_Voltage_lockout:
enables/disables VIN overvoltage lockout and selects
whether an overvoltage triggers an interrupt or a shutdown.
• WD:
sets up Watchdog parameters
5.2.3.4.6 Functional Safety
The Functional Safety tab manages ABIST, functional safety fault, self-test status, and
secure I
2
C.
UM11636
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 2 — 13 December 2021
39 / 51