NXP Semiconductors
UM11636
KITPF5200SKTEVM evaluation board
1 Introduction
The KITPF5200SKTEVM evaluation board user guide is intended for the engineers
involved in the evaluation, design, implementation, and validation of PF5200 Fail-safe
system basis chip with multiple SMPS (Switch Mode Power Supplies).
This document contains all of the information required to evaluate the PF5200 Fail-safe
system basis chip with two SMPS connected in single or dual mode.
The document covers connecting the hardware, installing the software and tools,
configuring the environment, and using the kit.
2 Finding kit resources and information on the NXP web site
NXP Semiconductors provides online resources for this evaluation board and its
supported device(s) on
The information page for KITPF5200SKTEVM evaluation board is at
. The information page provides overview information,
documentation, software and tools, parametrics, ordering information and a
Getting
Started
tab. The
Getting Started
tab provides quick-reference information applicable
to using the KITPF5200SKTEVM evaluation board, including the downloadable assets
referenced in this document.
2.1 Collaborate in the NXP community
The NXP community is for sharing ideas and tips, ask and answer technical questions,
and receive input on just about any embedded design topic.
The NXP community is at
3 Getting ready
Working with the KITPF5200SKTEVM requires the kit contents, additional hardware, and
a Windows PC workstation with software installed.
3.1 Kit contents
The KITPF5200SKTEVM kit contains the following items:
•
Assembled and tested evaluation board and preprogrammed FRDM-KL25Z
microcontroller board in an anti-static bag.
•
3.0 ft USB-STD A to USB-B-mini cable
•
Jumpers mounted on board
•
Quick Start Guide
3.2 Additional hardware
In addition to the kit contents, the following hardware is necessary when working with this
kit.
•
Power supply with a range of 3.3 V to 5.0 V and a current limit set initially to 1.0 A
UM11636
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 2 — 13 December 2021
4 / 51