NXP Semiconductors
Quick Start ADC1002S020
QS ADC1002S020
QS_ADC1002S020_2
© NXP B.V. 2010. All rights reserved.
Quick Start
Rev. 2 — 11 octobre 2010
7 of 24
The HSDC extension module is intended for acquisition/generation and clock generation
purpose. When connected to an ADC demo-board it is intended as an acquisition system
for digital output bits delivered by ADC, either CMOS (HE14 P1 connector) or LVDS DDR
(SAMTEC QTH_060_02 P2 connector).
The board brief specification is shown below:
•
8MB memory size for acquisition pattern;
•
2 16-bit channels CMOS up to 200 MHz;
•
16-bit LVDS DDR input data stream up to 320 MHz;
•
On-board or external reference for signal generation.
In this section the specific requirement for the use with ADC1002S020 demo-board will
be shown.
For more details on the HSDC-EXTMOD01/DB, please contact
dataconverter-
.
2.1 HSDC extension module: hardware initialization
Before using the generation board, make sure that you connect the USB cable prior to
the supply.
2.2 HSDC extension module: software initialization
Before using the generation board, the user needs to install software to control the board.
The steps are described below.
Go to the installation directory “\HSDC-EXTMOD01\Software\USBConfigSetup v1.3
100212 1525” on the CD. Double click on the file “CDM 2.04.16.exe” file.
Run the application “\HSDC-EXTMOD01\Software\USBConfigSetup v1.3 100212
1525\USBConfigSetup.msi”, this will display the following window:
Fig 3. “USBConfigSetup” window: step 1
Click “Next” to proceed with installation process:
