Nvidia ForceWare, Software User'S Manual

Page: 81 / 159

NVIDIA Corporation 77
C
HAPTER
3
Using the NVIDIA MediaShield RAID Management Utility
Migrating from RAID 0 (with One Disk) to RAID 1 (with Two Disks)
The following example shows you how to convert a RAID 0 array with one disk to a RAID
1 array (with two disks)
1
Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2
Boot to Windows, launch the MediaShield application, then follow the steps outlined in
“Creating a Striped Array” on page 47 with the exception that you need to select one
disk instead of two disks.
When that is done, you should see a screen shot similar to the following:
Figure 3.60
RAID Array Created
3
Click click on Striping and select “Convert Array...” as shown in the following screen
shot:
Figure 3.61
Selecting “Convert Array” from the Pop Up Menu