Nvidia ForceWare, Software User'S Manual

Page: 122 / 159

118 MediaShield User’s Guide – Version 4.0
C
HAPTER
3
Using the NVIDIA MediaShield RAID Management Utility
Migrating from RAID 5 to RAID 0+1
The following example shows you how to convert a RAID 5 array with three disks to a 0+1
array with four disks.
1
Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2
Boot to Windows, launch the MediaShield application, then follow the steps outlined in
“Creating a RAID 5 Array” on page 62 .
When that is done, you should see a screen shot similar to the following:
Figure 3.124 RAID Array Created
3
Click on RAID 5 and select “Convert Array...” as shown in the following screen shot:
Figure 3.125
Selecting “Convert Array” from the Pop Up Menu