Nvidia DualTV, User Manual, Page: 25 / 119

DU-01848-001_v06 19
03/28/06
Software Installation
The CD that has been shipped with your NVIDIA DualTV MCE contains the
following software:
‰
NVIDIA PureVideo Decoder software
‰
NVIDIA MCE Extensions
‰
NVIDIA DualTV WDM Driver
Note: All the NVIDIA DualTV hardware must be installed prior to installation of the
software. See Hardware Installation on page 11 if you have not installed the
hardware.
If you have an MCE remote control/receiver and it is not already connected to
the MCE PC, plug it in only after the software installation (this chapter) and
before setting up the TV signal in MCE (see next chapter).
When you see the “Found New Hardware” (detecting new tuner hardware)
screen after you have inserted the NVIDIA DualTV tuner card and powered up
the system, click Cancel. Then insert the CD and run the software installation
program.
If the “Found New Hardware” (detects WDM drivers) screen is displayed after
software installation and system restart, click Next, and then Finish.
After the software installation, you need to configure the tuners (NVIDIA DualTV
provides 2 tuners on a single card) in MCE (see next chapter).
Installing Software and
Registering Your NVIDIA
DualTV Card
Installing the NVIDIA DualTV software and registering your NVIDIA DualTV
card consists of the following procedures:
‰
Power up the system.
‰
Verify the environment—check PC for MCE, NVIDIA DualTV card, administrator
privileges.
‰
Select components, install path, and check for existing analog tuner cards.
‰
Check for software updates.
‰
Install the NVIDIA PureVideo Decoder—requires activation key.
‰
Install the NVIDIA DualTV WDM driver, User’s Guide(s), and shortcuts.