Preliminary
International Dialing
If you are making an international call outside the North America Number Plan
Area, enter the international dialing prefix (011), followed by the country code
and phone number. Be careful not to pause too long (5 seconds by default) while
dialing, or
Tel-Lynx
will place the call with the digits you have dialed. Press
#
when you have completed the number. This will cause
Tel-Lynx
to dial the
number immediately without waiting 5 seconds (or whatever delay you have set).
Rotary Dialing:
. Dial the international number, including the international
dialing prefix, then
double flash
the switch hook to complete the international
dialing without waiting for the delay.
Contacts may have international phone numbers. Please note that you must
include the 011 before the international number when creating the contact.
Caution:
Do not delay in entering the
1
after the
0
when dialing
0
1
1
or you will invoke the operator feature.
Picking up a Call in Progress
You can use your home telephones to pick up a call that originated on your
mobile phone handset (
TLC
or
TLC Plus
only) or a
Skype™
call that originated
on your PC. Additional
Tel-Lynx
features allow you to pick up a call after it has
gone to voice mail or has been placed on hold, and to pick up a ringing line from
the other line.
If a call is in one of the states mentioned above, when you take your telephone
off-hook,
Tel-Lynx
will tell you that you can flash the switch hook to pick up or
transfer the audio. Flashing the switch hook will put you into the special menu,
and from there you will have the option pick up the call or to enter the main
menu.
You can also pick up calls that originated on Skype or your mobile phone without
flashing the switch as follows:
At the dial tone:
Press
#
#
2
to transfer audio from Skype
Press
#
#
3
to transfer audio from Mobile Phone 1
Press
#
#
4
to transfer audio from Mobile Phone 2
Rotary Dialing:
0
,
double flash
,
double flash
,
{
Outside Line
}
For example, to pick up a call from Mobile Phone 1:
0
,
double flash
,
double
flash
,
3
Caution:
Do not delay in flashing the switch hook after dialing 0 or you will
invoke the operator feature.
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Page 33 of 76