6 | nVent.com
RayClic-SB-02
Drip loops
1
3
4B
RayClic-T
and RayClic-X
RayClic-S
Drip loops
2
4A
• Mount flat (wall-mounting) bracket
by installing screws through the
center holes.
• Mount bracket above water line.
Do not mount in gutter or where it
may be immersed in water.
• Prepare and attach heating cables as
detailed in steps 2 through 9 (pages 3–5).
• Attach connector to mounting bracket by pressing until it
snaps into place.
• Complete heating cable installation and install drip loops
as shown.
• Protect heating cable from sharp edges.
• Position attachment clips on mounting bracket based on
the type of connector being installed.
• Attach connector to mounting bracket by
pressing until it snaps into place.
• Complete heating cable installation and
install drip loops as shown.
• Protect heating cable from sharp edges.
SPLICE
TEE
Roof Installation
