nVent RAYCHEM 1244-0006829, Operating And Installation Manual

Page: 13 / 48

nVent.com | 13
Chapter 5 “Operator level”
Chapter 6 “Parameter level”
Chapter 7 “Configuration level”
TIP!
If no key is pressed for 180 s the device changes back to normal
display (factory-setting). The setting can be changed in the Setup
program (Display/Operation/Service counter -> Operation ->
Time-out).
4.3 User level configuration
A maximum of eight frequently used parameters can be made
available in the User level. Use the Setup program to configure
these parameters.
Once these parameters are selected a customer friendly name
can be assigned. Names can consist out of maximum four
characters (represented on 7-segment display). If no name is
assigned the factory defaults will be used.
Figure shows the menu of the Setup program
(in case of TCONTROL-CONT-03/MA and .../COMA parameter 8 is
switched off)