nVent RAYCHEM 1244-0006829, Operating And Installation Manual

Page: 15 / 48

nVent.com | 15
Time entry
A decimal place is mapped in the centre and on the right to
display times. The time unit can be configured.
Chapter 7.5 “Timer”
Change value
(top - red)
Parameter flashes
Select Parameter
(bottom - green)
P
1. Select parameter by pressing or
2.
Change to the entry mode using
(lower display blinks)
3. Change a value using and
The value alters dynamically for as long as the key is kept pressed.
4. Take over the entry with or automatic return after 2 s or
cancel the entry with the value will not be applied.
4.6 Controller
Increase set point value
Reduce set point value
Normal display:
Regulation to set
point value 21,0
>2s
Manual mode:
Output value 30%
Further levels:
P
alternatively
1
P
F
EXIT
F
EXIT
Normal display
In normal display, the controller regulates to the entered set point
value.
Changing the set point value
From the normal display:
1. Change the set point value using and (the value will be
automatically applied)
The longer the key is kept pressed, the faster the set point
value changes.
USEr
1
OPr 1
PArA
ConF