nVent RAYCHEM 00123456, Manual

Page: 22 / 32

22 | nVent.com/RAYCHEM
Button or button
combination
(permanent)
Function
In basic status When
navigating
When editing
Back short (< 2 s) Function configurable
(default setting:
without function)
Move to
menu level
above
Leave editing
mode without
changes
Back long (> 2 s) Function configurable
(default setting: switch
to manual mode / end
manual mode)
--- ---
Menu/OK short
(< 2 s)
Call up main menu Call up
sub-menu
or switch
to editing
mode
Leave editing
mode with
changes
Up + Down long
(> 2 s)
+
Start/stop autotuning --- ---
Down + Menu/OK
very long (> 5 s)
+
Call up menu for level
inhibit
--- ---
4.2 Language selection
After switching on the device for the first time, the user can
either confirm the flashing displayed language with “OK” or
select another language using the “Up”/”Down” buttons and then
confirm this with “OK”.
If, at a later point, another user is to also have the option of
selecting a language, the configuration parameter “Language
selection active” must be set to “Yes” (Configuration > System
data). After applying the language, this parameter is automatically
set to “No”, so that language selection is not necessary the next
time the device is switched on.
The language of the device texts can be changed at any time in
the configuration settings (regardless of language selection after
switch-on).