Page 11
®
Installation & Operating Instruction Manual
Configuration #4
—
Dual Speed Blower & Light
The Air System is activated by pressing the Power button on the
Keypad. The Air System runs independently of the Tub Water Level.
This will turn the Blower on at high speed and activate its 30-minute
timer. Pressing the Button a second time will cycle the Blower to
low speed. Pressing the Button a third time turn the Blower off.
The LED Multi-Color Tub Light is activated by pressing the Light button. The first
press will start its 30-
minute timer, and activate the Tub Light in a “Rainbow”
mode. Subsequent presses will change the color to Blue, White, Blue, Aqua, Green,
Yellow, Red, Magenta, and off. The Tub Light will turn off automatically when the
timer expires. To turn off this function earlier, press and hold the Light Key at any
time.
Configuration #5
—
Tri Speed Blower
w/ Oscillation Option & Light
The Air System is activated by pressing the Power button on the
Keypad. The Air System runs independently of the Tub Water Level.
This will turn the Blower on at high speed and activate its 30-minute
timer. Subsequent presses will change the speed to medium, low,
oscillate mode and off. The system will stop automatically when the
timer expires.
The LED Multi-Color Tub Light is activated by pressing the Light button. The first
press will start its 30-
minute timer, and activate the Tub Light in a “Rainbow”
mode. Subsequent presses will change the color to Blue, White, Blue, Aqua, Green,
Yellow, Red, Magenta, and off. The Tub Light will turn off automatically when the
timer expires. To turn off this function earlier, press and hold the Light Key at any
time.
Configuration #6
—
Variable Speed Blower
w/ Oscillation Option & Light
The Air System is activated by pressing the Power button on the
Keypad. The Air System runs independently of the Tub Water Level.
This will turn on the Blower at high speed and activate its 30-minute
timer. Press again to turn off.
To reduce speed, Press and Hold to ramp down and release at desired speed. A
Subsequent Press-and-Hold resets the load to High Speed and Ramp Down
sequence. The Oscillate feature is activated if the button is held for 2 seconds after
reaching the “Low” speed in the speed ramp. The system will stop automatically
when the timer expires.
