Page 10
Triac Model Operating Instructions
Note:
The run timers for each component are independent of each other. At the
end of the cycle, the component will automatically turn off.
Configuration #1
—
Light Only
The LED Multi-Color Tub Light is activated by pressing
the “Light” Air Button or Keypad. The first press will
start its 30-minute timer, and activate the Tub Light in a
“Rainbow” mode. Subsequent presses will change the
color to Blue, White, Blue, Aqua, Green, Yellow, Red, Magenta, and off. The Tub
Light will turn off automatically when the timer expires. To turn off this function
earlier, press and hold the Light Key at any time.
Configuration #2
—
Tri Speed Pump w/ Oscillation Option & Light
The Whirlpool Water system is activated by pressing the Power
button on the Keypad. This will turn on the load at high speed and
activate the automatic 30-minute timer. Subsequent presses will
change the speed to medium, low, oscillate mode and off. The
system will stop automatically when the timer expires.
The LED Multi-Color Tub Light is activated by pressing the Light
button Keypad. The first press will start its 30-minute timer, and activate the Tub Light
in a “Rainbow” mode. Subsequent presses will change the color to Blue, White, Blue,
Aqua, Green, Yellow, Red, Magenta, and off. The Tub Light will turn off automatically
when the timer expires. To turn off this function earlier, press and hold the Light Key at
any time.
Configuration #3
—
Variable Speed Pump w/ Oscillation Option & Light
The Whirlpool Water system is activated by pressing the Power
button on the Keypad. This will turn on the Pump at high speed and
activate its 30-minute timer. Press again to turn off.
To reduce speed, Press and Hold to ramp down and release at
desired speed. A Subsequent Press-and-Hold resets the load to High
Speed and Ramp Down sequence. The Oscillate feature is activated
if the button is held for 2 seconds after reaching the “Low” speed in
the speed ramp. The system will stop automatically when the timer expires.
The LED Multi-Color Tub Light is activated by pressing the Light button Keypad. The
first press will start its 30-
minute timer, and activate the Tub Light in a “Rainbow”
mode. Subsequent presses will change the color to Blue, White, Blue, Aqua, Green,
Yellow, Red, Magenta, and off. The Tub Light will turn off automatically when the
timer expires. To turn off this function earlier, press and hold the Light Key at any time.
