Nuvo NV-USBW, Installation Manual

Page: 12 / 28

10
Figure 9 – Wireless Network (SSID) selection window
(
13
)
The window shown in Figure 10 will come up. Left-click the “Execute” button. Make certain
that:
(a) The Wireless Mode is set to “Infrastructure”
(b) The SSID corresponds with the name of your user's network
(c) Network Authentication is set to “Open”
(d) Use WEP is set to “OFF” only if your user does not have security set up. If security
is in place and you entered a WEP key in step (12), this field should be set to “ON”.
If everything above checks out, left-click “Execute”. Otherwise, left-click the “<Back” button
and correct the entry errors (step 12).