Electrical Schematic Diagram
Troubleshooting Tips
Problem
Analysis
Troubleshooting Method
The display screen isn’t bright
enough while operating
Check if the plug is
plugged in
Insert the plug into the
socket
Take it to a professional
for repair
The machine is beeping during
the process of extracting oil
When the squeezing
chamber gets stuck while
operating, the machine
will reverse for a moment
automatically, and then
stop. The display will
show “E1
”
Take apart the squeezing
chamber and follow the
"cleaning method" to
clear out the crushed
aggregates inside.
"E2" warning appears on
the screen
Something on the PCB
board is loose
Open the upper part of
the main body, connect
the loose terminals to the
PCB board.
Difficulty separating the
Screw and squeezing
chamber
There's still waste inside
the squeezing chamber
Assemble the squeezing
chamber on the product,
start the machine and then
press and hold the
"Function" key for 5
seconds and then attempt
to disassemble again.
Use the small pushing rod
to knock out the screw.
Soak the two in warm
water for 20 minutes and
Oil
squeezing
motor
Stirring
motor
Power
supply
board
Fan
M
Control
panel
Brown
Yellowgreen
Blue
Micro
switch
Heating
tape
on
pan
Heater
Thermistor
(Controlling
heating tape)
Thermosat
