background image

 

Safety Instructions 

  Warning: Possible accidents could occur if you operate this machine without reading the 

instructions. 

  Notice:  If  you  operate  this  product  with  disregard  to  the  instructions,  your  product, 

property, or yourself could be endangered. 

 

Please  read  the  operation  instruction  of  the  manual  in  detail  while  using  this 

machine, and keep this book for future reference. 

 

In order to prevent accidents or danger, the power cord or plug must be replaced 

by  the  manufacturer  or  the  maintenance  department  designated  by  the 

manufacturer. 

 

 

 

 
 
 
 
 
 

 

N otic e

Please read the each 

instruction of the directions in 

detail before using the product.

The power supply used shall be  0V 

of voltage and more than 10A of 

current.

Please don't use the product 

beyond the functional scope.

Be sure not to operate the product by 

the children.

Please stop using the product when 

the power line and plug are damaged 

and failed in function.

The product must be operated on the 

stable and reliable work surface.

Please don’t use the product outdoors.

Please don't contact the power line to 

the sharp corners or high temperature 

surfaces.

Please hold the plug while pull out the 

plug, and please don’t pull the power 

line.

Clean the product when it is cooled fully 

after using, so as to avoid from scalding.

Please don’t immerse the product in 

the water or any other liquids.

To ensure the safety, please don’t dismantle the product arbitrarily, and please send to the each 

service center or agency of company to maintain by the qualified maintenance personnel, if any 

abnormal.

11

Summary of Contents for PKOPR15

















Reviews: