background image

 

Product Scope 

 

This  product  is  able  to  squeeze:  peanuts,  sesame  seeds,  vegetable  seeds,  tea  seeds, 
soybeans  (shell  and  grind  to  about  5mm  before  the  extracting  the  oil),  sunflower 
kernels and walnuts (shell and crumb to about 5mm before the extracting the oil). 
This product does not apply to grains or seeds where the oil content is low and cannot 
be shelled (such as corn). 
 
*

Note:

  The  product  is  designed  for  family  indoor  use,  and  is  not  applicable  to 

commercial purpose; otherwise, the product longevity may be shortened. 
 
 

Notice 
 

Before using this product, please read the instructions in detail and use this machine 
with regard to the instructions. 
 
1.  Please  do  not  share  the  power  source  of  this  product  with  other  high-powered 
electrical equipment. 
2.  To  prevent  the  electric  surge  and  any  possible  danger,  please  use  this  machine 
according to the instructions. 
3. This machine is strictly prohibited from being immersed in water. This includes the 
power line and the plug as well. 
4.  Please  attention  while  you  or  someone  else  is  operating  this  machine  as  to  avoid 
possible accidents or danger.   
5.  If  you  have  discovered  any  damaged  parts  or  damage  to  the  product  structure, 
please do not use this product. You should also never attempt to perform maintenance 
to  the  machine  by  yourself;  maintenance  should  be  done  by  a  professional  so  as  to 
avoid possible accidents or danger. 
6.  Children  or  disabled  people  should  never  operate  this  machine  without  parental 
guidance or supervision. 
7. Please do not use this product on or near high-temperature areas or appliances. 
8. Please be careful while moving the machine or oil cup after the completion of the 
extraction of oil, so as to avoid the splashing or spilling of oil. 
9. Please do not touch or move any moving parts while the oil press is operating. 
10. Please don't insert any foreign or metal objects into the oil press so as to prevent 
any accidents, fire or short circuiting. 
11.  Please  don't  start  the  machine  while  the  squeezing  chamber  is  not  completely  in 
place. 
12. Before cleaning this machine, please switch off the power supply and pull the plug 
out while the machine is idle or being moved. 
13. Be sure not to place the machine near any flammable material or objects. 
14. In order to prevent danger, have the damaged power line or plug replaced by the 

Summary of Contents for PKOPR15

















Reviews: