NUTRIBULLET Juicer, User Manual & Recipe Book, Page: 15 / 88

Milling
The Milling Blade is for turning dry ingredients into powders. Perfect for
milling oats, nuts and seeds.
1
Fill ingredients into the Short Cup.
2
Twist on the Milling Blade.
3
Place the Cup onto the Power Base.
Press down and twist to lock the motor on.
4
Mill your ingredients until you achieve the
desired consistency.
5
To turn off the
NUTRIBULLET
- simply twist in
the opposite direction (to the right) to release
the tabs and stop pressing down on the cup.
Once the power base stops completely, remove
the cup from the power base.
HOW IT WORKS
Extracting
1
Fill ingredients into the Tall or Short Cup.
2
Add the liquid of your choice up to the MAX line.
(Liquid is required!).
3
Twist the Extractor Blade onto the Tall
Cup and hand tighten to make sure the
vessel has been sealed.
4
Press the vessel blade side-down onto the Power
Base. Press down and twist to extract for no longer
than 1 minute. If more extraction is needed, wait 1
minute, then repeat the extraction process in 1 minute
intervals up to 3 times as needed to achieve the desired
consistency. If more than 3 1-minute extractions are
needed, allow the power base to cool for 2-3 minutes
after the third extraction before beginning the next
round. You can see the extraction process happening.
Keep an eye on the consistency. Your
NUTRIBLAST is
ready when it looks smooth and creamy!
5
To turn off the
NUTRIBULLET - simply twist in the
opposite direction (to the right) to release the tabs and
stop pressing down on the cup. Once the power base
stops completely, remove the cup from the power base.
26 27
CAUTION: FRICTION FROM THE ROTATING BLADE WHEN EXTRACTING OR MILL-
ING CAN CAUSE INGREDIENTS TO HEAT AND GENERATE INTERNAL PRESSURE
IN THE SEALED VESSEL. IF THE VESSEL IS WARM TO TOUCH, ALLOW TO COOL
BEFORE CAREFULLY OPENING POINTED AWAY FROM YOUR BODY.
NUTRIBULLET, NUTRIBULLET,
Fill ingredients into the Short Cup. Fill ingredients into the Short Cup.
NUTRIBULLET,
2
intervals up to 3 times as needed to achieve the desired intervals up to 3 times as needed to achieve the desired
consistency. If more than 3 1-minute extractions are
consistency. If more than 3 1-minute extractions are
needed, allow the power base to cool for 2-3 minutes
needed, allow the power base to cool for 2-3 minutes
after the third extraction before beginning the next after the third extraction before beginning the next
round. You can see the extraction process happening.
round. You can see the extraction process happening.
Keep an eye on the consistency. Your
Keep an eye on the consistency. Your NUTRIBLAST NUTRIBLAST
ready when it looks smooth and creamy! ready when it looks smooth and creamy!
NUTRIBULLET, NUTRIBULLET, NUTRIBULLET, NUTRIBULLET, NUTRIBULLET,
LLC
The Milling Blade is for turning dry ingredients into powders. Perfect for The Milling Blade is for turning dry ingredients into powders. Perfect for
milling oats, nuts and seeds. milling oats, nuts and seeds.
Fill ingredients into the Short Cup. Fill ingredients into the Short Cup.