15
16
1-877-646-5288
n i n j a k itc h e n . co m
ENGLISH
TIP:
Select BOOST YES
when you want a thinner,
finer consistency. Use
BOOST NO when you want
more texture.
TIP:
If the stacked blade
assembly is not fully
seated, you will not be
able to install and lock the
lid into position.
TIP:
To learn more about
the unit’s programs, check
out page 9.
NOTE:
DO NOT add
ingredients before
completing installation
of the stacked blade
assembly.
NOTE:
The pitcher can
be installed in two different
orientations. The handle
can be positioned on the
front-right corner of the
motor base or the front-left
corner of the motor base.
USING YOUR MAX 88 OZ�
TOTAL CRUSHING
™
PITCHER
IMPORTANT:
Review all
warnings on pages 3-6
before proceeding.
1
Plug in motor base and
place on a clean, dry,
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
2
Lower the pitcher onto the
motor base. The handle
should be aligned slightly
to the right and the pitcher
should be oriented so the
LOCK symbols are visible
on the motor base. Then
rotate the container to the
left until you hear a click.
3
Exercising care, grasp the
stacked blade assembly
by the top of the shaft and
place it onto the drive gear
inside the pitcher. Note
that the blade assembly
will fit loosely onto the
drive gear.
4
Add ingredients to the
pitcher, making sure not
to exceed the Max Fill
line on the side of the
pitcher. When blending
any kind of liquids, such as
beverages or smoothies,
DO NOT exceed the MAX
Liquid line on the side of
the pitcher.
5
Place the lid on the pitcher,
aligning the triangle
symbol located on the lid
with the triangle symbol
located on the pitcher’s
handle. Press down on
the handle until you hear a
click. The triangle symbols
MUST be aligned for
the lid to lock into place
and the appliance to
operate. When the unit is
connected to power and
the container is correctly
locked into the motor
base, the program buttons
will illuminate and the unit
is ready for use.
