Operating Instruction and Documentation
UNI-LIFT 5000 CLT / Plus
- 28 -
• If the wheel free lift is in the lowest position turn the set screws clockwise and safe it
with the locknuts.
• Let off the double seat valves.
• Remove the hand pump and the objects between the cylinder and the flange!
The complete process must be observed by the operator. Close the emergency
lowering screws when any danger appears. After finishing the emergency
lowering, the set screws and the locknuts must be brought back into the original
position, otherwise a malfunction of the lift may occur.
Do not use the lift until defective parts are exchanged!!
Before the initiation after an emergency lowering, the objects between the cylinder
and the flange have to be removed! Otherwise the security devices are out of
function and this means danger to life and danger of damages!
6.3 Reset the main lift after an emergency lowering
Only when the lift is in the lowest position is the reset of the lift possible.
An access on the Dip-Switch is only allowed when the main switch is switched off
and only by instructed, authorized technical staff.
a) There musn´t be a vehicle on the lift.
b) Remove the cover of the operating unit.
c)
Remove the cover of the electrical large box.
d)
Press the button 1 (see pic. 2) and hold it.
e)
Switch-off the main switch and wait 5 sec. Hold the reset button.
f)
Switch-on the main switch and wait 5 sec. Hold the reset button.
g)
Let go off the reset button.
h) Press the button „ lowering“ until both platforms are in the lowest position.
i) If necessary repeat several times the steps d) until h) so that the lift is surely in the
lowest position.
j) After that move the Dip-switch 7 on position „on“.
k) Dip-switch 5 stays on position „on“.
l) Repeat the steps d) until h)
m)After that, move the Dip-switch 7 on position „off“. Dip-switch 5 stays on position
„on“.
Summary of Contents for UNI-LIFT 5000 CLT PLUS
