28
OPI-POWER LIFT HF 3S 8000-V1.0-EN
7.1 Maintenance plan
i
Before beginning service, disconnect from power. The work area around the lift is to be secured against
unauthorised use.
Visual
inspection
Spray
Oil
Lubricate
Clean with
compressed
air
Clean
Inspect
Time frame
Position
Type of
maintenance
Person in
charge
Maintenance plan
As required
Lift owner /
employer
The lift cylinder can sweat and small oil droplets can
form on the base plate, this is however, not a leak.
Daily
1
12
11
10
9
8
7 6 5
4
3
2
365 x / 12
Lift owner /
employer
Model and information signs, labels, brief operating
instructions, safety stickers and warning information
are to be cleaned and exchanged if damaged.
Daily
1
12
11
10
9
8
7 6 5
4
3
2
365 x / 12
Lift owner /
employer
Check the foot bumper for condition and function. Ex
-
change if damaged.
Daily
1
12
11
10
9
8
7 6 5
4
3
2
365 x / 12
Lift owner /
employer
The rubber acceptance plate is to be checked for
wear and replaced if necessary.
Every 3 months
1
12
11
10
9
8
7 6 5
4
3
2
4 x / 12
Lift owner /
employer
Check the tracks and the lift rail equalization parts
for wear. After cleaning, grease with multi-purpose
grease. We exclusively recommend that MO-2 high
performance lubricating grease is used. (available for
purchase directly from Oest).
Annually
1
12
11
10
9
8
7 6 5
4
3
2
1 x / 12
Trained ser-
vice personnel
Check the lifting arm block and gear for wear. Ex
-
change if there is visible damage.
Summary of Contents for HF 3S 8000
