Nussbaum HF 3S 12000, Operating Manual

Page: 9 / 64

OPI-POWER LIFT HF 3S 12000-V1.0-EN 9
Read all labels and verify that all authorized users
fully understand the meaning of each caution /
warning / safety instruction. Do not remove or de-
face safety labels from the lift.
1.8 Protocols
Technical documentation contains important infor-
mation for safe operation and for retaining func-
tional safety of the lift.
• To verify lift set up, the assembly protocol form is
to be completed, signed and sent to the manu-
facturer.
• Forms are available in this inspection book for use
in verifying single, regular and extraordinary safety
checks. Use the forms to document inspections and
leave the completed forms in the inspection book.
• The lift master forms must record changes to the
construction or changes to set up location.
1.9 Set up and test the lift
Safety relevant work on the lift and safety inspec-
tions may only be done by personnel specifically
trained to carry it out. They are designated in gen-
eral and in this documentation as technical experts
and specialists (competent people).
• Technical experts are people (freelance expert
engineers, TÜV specialists) that may inspect and
assess due to their education and experience with
lifts. They are knowledgeable in the appropriate
work safety and accident prevention regulations.
• Specialists (competent people) are people who
have sufficient knowledge and experience with lifts
and have participated in a special factory training
by the lifts manufacturer.