G3 Series EtherNet/IP
TM
Technical Manual
Page 4-22
TDG3EPTM1-9EN
05/18
Subject to change without notice
www.asco.com/g3
EtherNet/IP
TM
Straight-Through Cabling Diagrams
Straight-Through Ethernet cable is used when connecting an Ethernet node to a basic media component (router,
switch, hub, etc.). Here are some basic wiring examples of Straight-Through cabling.
CROSSOVER CABLE
MALE
2
3
4
1
RJ45 to M12 D Coded Cable
TX- (ORANGE)
RX+
(WHITE/GREEN)
TX+ (WHITE/ORANGE)
RX- (GREEN)
CROSSOVER CABLE
M12 D Coded to M12 D Coded Cable
6
3
2
1
TX- (ORANGE)
TX+ (WHITE/ORANGE)
RX- (GREEN)
RX+ (WHITE/GREEN)
MALE
RX+ (WHITE/GREEN)
TX- (ORANGE)
RX- (GREEN)
TX+ (WHITE/ORANGE)
MALE
2
3
4
1
RX+ (WHITE/GREEN)
TX- (ORANGE)
RX- (GREEN)
TX+ (WHITE/ORANGE)
2
3
4
1
MALE
NOTE!
•
These are examples only. For appropriate network cabling information, please see
the ODVA document titled, “EtherNet/IP
TM
: Media Planning and Installation
Manual”.
•
RJ45 shown as T-568B standard.