Numatic TTV 678-300, Operator'S Instruction Manual, Page: 36 / 72

36 235670 10/11 (A07)
Free-Wheel Function / Freilauffunktion / Fonction roue libre / V
rijloopstand
ALWAYS ENSURE THAT THE MACHINE IS ON LEVEL
GROUND BEFORE DISENGAGING BRAKE ARM.
NEVER DISENGAGE THE BRAKE WHEN THE MACHINE
IS ON A SLOPE / GRADIENT
NEVER TOW THE MACHINE WITH THE BRAKE ENGAGED
! !
The TTV-678 is equipped with a free-wheel function that will enable the operator to move / tow the machine.
The motor brake is disengaged by opening the
'&;;="!@>"
Your start-up kit includes a brake drive disengage key (329945,
"!J>';''&;;
="!X>"
]';="!X>
the motor brake will be fully disengaged.
The machine will now be in full free-wheel mode.
When towing the machine ensure that a suitable tow bar is used.
Care must be taken when towing; maximum speed to be no more
than 7kmh.
The machine can be towed from the front bar as indicated (see
"!!>"
WARNING!
WHEN THE BRAKE IS DISENGAGED THE MACHINE IS IN
FREE-WHEEL MODE AND HAS NO BRAKE FACILITY,
THEREFORE A RIGID TOW BAR MUST BE USED IF TOWING.
Remember to remove the brake disengage key when you reach your
;{'&"
Fig.52
Fig.53
Fig.54
Fig.55