Numatic CRG 8055/100T, Original Instructions Manual, Page: 26 / 52

26
www.numatic.co.uk
Changing the Floor Tool Blades
Lower the floor tool then unscrew the retaining knobs and slide it off the holding bracket.
Rinse the floor tool assembly with clean water and refit.
Periodically the floor tool blades should be examined and checked for wear and damage.
Replacement is a reversal of the removal process.
4
2
3
1
5
Floor Tool Overview
1. Retaining pins x 4
2. Rear blade
3. Blade carrier
4. Front blade (slotted)
5. Floor tool main body
Always ensure that the machine is switched off prior to any maintenance.
! !
NOTE: The blades are designed to be
reversible, thus extending their useful
working life.
Remove floor tool. Remove four retaining pins.
Turn the floor tool over. Separate the blade from the carrier. Peel away blades.