12
www.numatic.co.uk
To disengage the brush, press the brush engage button with the brush deck in the
raised position.
NOTE: Do not lift the brush deck until the brush has stopped revolving or the
brush will release.
Make sure you raise the brush deck before driving to the cleaning site.
Safety Gloves are recommended for the changing of used brushes.
When in transit, the floor tool can be placed on the bracket at the rear of the machine.
Simply slot the retaining knob into the bracket.
Machine Set-up Guide
Always ensure that the machine is switched off before making any adjustments.
!
!
10
11
12
Raise Brush Deck / Fitting the Brush / Lower Brush Deck
Floor Tool Transit Bracket
Raise brush deck.
Brush deck raised position.
Slide brush under machine.
Brush in place.
Lower brush deck.
Brush deck lowered.
Press brush engage button.
Switch machine on.
Machine has picked up the brush.
CRG 8072
Twin Brush
Summary of Contents for CRG 8055/100T
Page 49: ...49 T 01460 68600 EU Declaration of Conformity...
Page 50: ...50 www numatic co uk Notes...
Page 51: ...51 T 01460 68600 Notes...