NUK Eco Control Audio 500, Operating Instructions Manual

Page: 25 / 122

23
3. Components of the baby monitor
1 Baby unit
2 Speaker
3 Mains adapter socket
4 Microphone
5 On/Off button:
– brief press: switches on;
– long press: switches off.
6 Power LED
7 VOX LED
– lights up green when it has set up a
connection to the parent unit;
– switches off if the connection to the
parent unit is lost.
8 Parent unit
9 Battery cover
10 The Vol + button:
– increases the volume.
11 The Vol - button:
– reduces the volume.
– Switches to mute on the lowest setting.
Sounds are then indicated only by the
LEDs
16 .
12 Speaker
13 Connection indicator
– lights up green when it has a
connection;
– flashes green: if there is a working
connection but Eco-Mode is activated;
– lights up red if the connection is lost.
14 On/Off button
15 The power supply indicator POWER
– lights up green: the device is switched
on and the battery is fully charged;
– flashes green: the battery is currently
being charged;
– lights up red and beeps at one minute
intervals: low battery warning. Within
about 15 – 20 minutes the parent unit
will switch off automatically.
16 Indicator LEDs
– indicates the noise level in the nursery.
The more LEDs are lit, the louder are
the noises;
– indicates the different levels when you
are adjusting the volume. The more
LEDs are lit, the louder the sound from
the loudspeaker;
– indicates the different levels when you
are adjusting the VOX sensitivity. The
more LEDs are flashing, the sooner the
device will react to sounds. If 5 LEDs
are lit the device will switch to
continuous transmission.
17 Press the VOX button
– press briefly and use Vol + / - to set the
transmission sensitivity.
18 Hold down the TALK button:
– Holding down this button activates the
function “talk to baby”;
– while the baby unit is in Eco-Mode, the
Talk-Back function is disabled and this
is indicated by two consecutive beeps.
19 Mains adapter socket
20 Microphone