NUK Eco Control Audio 500, Operating Instructions Manual

Page: 26 / 122

24
3.1 Brief overview of messages
4. Starting the device
Note: Always connect the cables before
inserting the mains adapter into the socket.
4.1 Connecting the parent
unit
The parent unit is powered by the supplied
rechargeable LiPo battery. This can be
charged using the supplied mains adapter.
Caution! To prevent malfunctions, first
insert the battery into the parent unit and
then connect the mains adapter to the
parent unit.
1. Remove the battery cover
9 on the back
of the parent unit 8 , by sliding it
downwards.
Baby unit
Light Display Meaning
Power-LED 6 green Baby unit is switched on
VOX LED 7
green Link ok (non Eco-Mode)
OFF Link ok (Eco-Mode)
Link not ok
Parent unit
Light Display Meaning
Connection
indicator 13
green Link ok (non Eco-Mode)
green blinking Link ok (Eco-Mode)
red blinking
1 beep every 30 s
Link not ok
Power-LED 15
green The parent unit is switched on and the
battery is fully charged
red
1 beep every 60 s
Low battery warning.
The parent unit will switch off within the
next 15 min without additional warning.
green blinking Charge battery indicator
Indicator
LEDs
16
1 - 5 LEDs blinking Sensitivity (VOX) setting. The more
LEDs are flashing, the sooner the device
will react to sounds. If 5 LEDs are lit the
device will switch to continuous
transmission.
1 - 5 LEDs
1 - 5 beeps
Volume regulation. The more LEDs are
lit, the louder the sound from the
loudspeaker.
1 - 5 LEDs Visual baby sound indication. The more
LEDs are lit, the higher the noise level in
the nursery.
None single beep Talk-Back on parent unit
None double beep
Talk-Back on parent unit during
Eco-Mode