NUK Eco Control Audio 500, Operating Instructions Manual

Page: 29 / 122

27
makes a noise that exceeds your selected
sound threshold (VOX levels 1 - 4). Eco-
Mode is deactivated immediately and the
connection indicator
13 stops flashing.
At VOX level 5 the device transmits
continuously and Eco-Mode is deactivated.
If you want to check that everything is OK
while Eco-Mode is activated (although this
already indicates that your baby is sleeping
peacefully), you can deactivate Eco-Mode
by switching to permanent transmission
mode:
1. press the
VOX button 17 on the parent
unit 8 .
2. Then press the Vol+ button 10 repeatedly
until all 5 LEDs 16 are lit.
5. Operating the baby unit
5.1 Switching the baby unit on
and off
The baby unit 1 will switch on automatically
as soon as you have connected the mains
adapter and plugged it into the power
supply. You can subsequently switch the
baby unit on or off at any time:
• To switch the baby unit
1 on or off, press
the On/Off button 5 .
5.2 Indicator LEDs
• The Power LED 6 lights up green while
the baby unit is switched on.
• The VOX LED 7 on the baby unit lights up
green when there is an established
connection between it and the parent
unit.
• The VOX LED 7 will not be lit while the
baby unit 1 is switched to Eco-Mode or if
it was not possible to set up a connection
to the parent unit.
6. Operating the parent unit
6.1 Switching the parent unit
on and off
To switch the parent unit 8 on or off, press
and hold the On/Off button 14 :
– when you hear a beep and the Power
LED 15 lights up, the parent unit is
switched on;
– when you hear a beep and the Power
LED 15 goes out, the parent unit is
switched off.
6.2 Indicator LEDs
• The connection indicator 13 on the
parent unit 8 shows the state of the
connection to the baby unit 1 . It:
– lights up green when it has a
connection;
– flashes green when the baby unit is in
Eco-Mode and indicates that your
baby is sleeping peacefully;
– lights up red if the connection has
broken down or the baby unit is
switched off.
Notes:
– If the baby unit 1 is in Eco-Mode and
the parent unit moves out of range, the
connection indicator
13 will light up
red. You will also hear a beep every
30 seconds.
– As soon as the parent unit 8 comes
back into range, or the reason for the
breakdown in communications is
eliminated, the connection indicator
13
lights up green again indicating that the
units are able to communicate.
– When the units are first switched on,
the connection indicator 13 will initially
be red. The parent unit and baby unit
will set up a connection. As soon as the
connection is set up the display will
turn green.