NuEra 310HD series, Administrator'S Manual

Page: 47 / 94

Administrator's Manual 4. Web-based Management
Version 1.0.2 47 October 2009
Parameter Description
SIP Proxy and Registrar
Use SIP Proxy Determines whether a SIP Proxy server is used.
ƒ
Disable = Proxy isn't used (default).
ƒ
Enable = Proxy is used and outgoing calls are routed to the configured
proxy.
Proxy IP Address or
Host Name The IP address or host name of the SIP proxy.
Note: This parameter is available only if the parameter Use SIP Proxy is
enabled.
Proxy Port The UDP or TCP port of the SIP proxy.
Note: This parameter is available only if the parameter Use SIP Proxy is
enabled.
Maximum Number of
Authentication Retries Defines how many times authenticated register messages are re-sent if 401
or 407 responses with a different “nonce” are received.
Note: This parameter is available only if the parameter Use SIP Proxy is
enabled.
Use SIP Proxy IP and
Port for Registration Use the SIP proxy IP address and port for registration. When enabled, there is
no need to configure the address of the registrar separately.
ƒ Disable
ƒ Enable (default)
Note: This parameter is available only if the parameter Use SIP Proxy is
enabled.
Use SIP Registrar Enables the phone to register to a separate Registrar server.
ƒ
Disable = phone doesn't register to Registrar server.(default)
ƒ
Enable = phone registers to Registrar server when the phone is powered
up.
Registrar IP Address or
Host Name The IP address or host name of the registrar server.
Note: This parameter is available only if the parameter Use SIP Registrar is
enabled.
Registrar Port The UDP or TCP port of the registrar server.
Note: This parameter is available only if the parameter Use SIP Registrar is
enabled.
Registration Expires The registration timeout, in seconds.
Note: This parameter is available only if the parameter Use SIP Registrar is
enabled.
Use SIP Outbound Proxy Uses an outbound SIP proxy (all SIP messages are sent to this server as the
first hop).
ƒ
Disable (default)
ƒ
Enable
Outbound Proxy IP
Address or Host Name The IP address of the outbound Proxy. If this parameter is set, all outgoing
messages (including Registration messages) are sent to this Proxy according
to the Stack behavior.
Note: This parameter is available only if the parameter Use SIP Outbound
Proxy is enabled.